View PDF Catalog Closeout Items 
Rotational Total Body Irradiation (TBI) Stand 120 VAC
Rotational Total Body Irradiation (TBI) Stand 120 VAC
The Rotational Total Body Irradiation Stand was designed for use when treating the total body with electrons.
The stand has an adjustable rotating platform that adjusts vertically based on the patient’s height and will rotate 360°. The platform is marked in 60° increments. The adjustable rotating platform is in the lowest position at 4.5" from the floor and is adjustable upward in 1" increments. This allows centering the patient to the central axis of the beam. The rotating platform is made of gray PVC covered with non-slip vinyl material and has a mounting hole for the seat post. The Rotation Motor attaches to the rotating platform with four (4) mounting screws and the Motor Speed Controller attaches to the vertical "T" leg. The Motor Speed Controller is variable speed and adjustable from 3 to 7 RPM with scale markings at 3, 4, 5 and 6 RPM. A slow Start-up and Slow-down is designed into the Motor Speed Controller for patient stability. A 60’ On/Off Rotation Remote Control Cable with a switch allows the therapist to start and stop the platform rotation from the control area.
An adjustable seat post is included to provide maximum adjustment, in 1/4" increments, of the seat height. The seat post to be used is determined by the patient's leg inseam. The seat height is determined and the seat is locked to the seat post. The seat direction is set by rotating the seat post and locking when desired direction is selected.
The rotational hand rail assembly rotates freely with patient rotation and accommodates the optional Safety Harness (Item 495-6066).
The Rotational Total Body Stand frame is made of 2" steel tubing. The frame consists of two (2) "T" legs with casters and a top stabilizer bar. Holes spaced 1" apart on the vertical "T" legs allow easy adjustment of the rotating platform and hand rail assembly. The Rotational TBI Stand can be taken apart easily for storage. The rotation motor is easily removable from the rotating platform by removing the four (4) mounting screws and the motor speed controller easily lifts off the vertical "T" leg. The top stabilizer bar, vertical "T" legs, adjustable rotating platform and rotational hand rail assembly are all removable for easy breakdown. The beam spoiler hanger assemblies attach to the top stabilizer bar. The stand has 4 swivel locking casters which allow easy movement and positioning.
The Rotational Total Body Irradiation Stand Includes:
• Frame
• Adjustable Rotating Platform
• Adjustable Seat Post Assembly
• Rotational Hand Rail Assembly
• Rotation Motor
• Variable Motor Speed Controller 3-7 RPM
• On/Off Rotation Remote Control Cable and Connector
• 2 Beam Spoiler Hanger Assemblies
Specifications
Overall Size: 45" W x 43 1/4" L x 110" H (114 x 110 x 280 cm)
Platform Size: 38" W x 31" L (96.5 x 78.7 cm )
Rotation Area: 22" Diameter (56 cm)
Rotation Speed: 3-7 RPM
Power: 120 VAC
Adjustment from Floor: 4 1/4" (11 cm) and up in 1" increments
Shipping Weight: 485 lbs. (221 kg)
Weight Capacity: Passed 500 lb (226 kg) load test
Optional Accessories
Item 495-603:
Wedge Tray Flattening Filter for TBI, 6 MeV, Varian III
Item 495-604:
Wedge Tray Scale for TBI Isodose Curves, Varian III
Item 495-6066:
Safety Harness, attaches to the rotational hand rail assembly and prevents a patient from falling.
Item 495-605-83 through 495-605-86:
Beam Spoiler/Degrader Assembly the optional beam spoiler is available in 3/8" or 1/2" thick acrylic or polycarbonate. The beam spoiler measures 42" W x 96" L.
Acrylic Density: 1.185 g/cc
Polycarbonate Density: 1.2 g/cc
Item 936-583 through 936-627:
Tungsten Eye Shields with Aluminum Caps
Item 935-5831 through 935-6272:
CT/MR Dummy Eye Shields
